Descripción

IAS-30-6.5-N-K-PEEK-StEx, ATEX of German company Rechner is manufactured of first-rate quality materials and is renowned for its operational reliability and long durability. All brand products are designed to comply with the highest quality standards and are well suited for operation under extreme application conditions.Rechner offers a wide range of quality products, which are suited for use in automated systems in varied areas.
Inductive Sensors with ATEX CertificateInductive Sensors according to NAMUR EN 60947-5-6 for use in areas with risk of explosion.• ATEX Zone 20 (Dust) and 0 (Gas)• Both variants are available for flush and non-flush mounting in metal.• Different body sizes available from 6.5 mm in diameter up to M32 x 1,5ATEX Zone 20 Zone 0Namur
Thread / Process connectionO 6,5 mm
Housing material active surfacePEEK (FDA 21 CFR 177.2415)
Housing materialPEEK (FDA 21 CFR 177.2415)
Housing material lidPA / PPO
Electrical version2-Leiter DC
Permitted residual ripple max.5%
Frequency of operating cycles max.500 Hz
Protective circuitEingebaut
Degree of protection IEC 60529IP 67
NormEN 60947-5-6
Selfinductance (L)2 mH
Selfcapacitance (C)250 nF
Operating current active surface free> typ. 2 mA
Operating current active surface covered< typ. 1,5 mA
Sensing dinstance Sn1,5 mm
Operating voltage5…15 V DC, Ui = 15 V DC
Permitted ambient temperature min.-20 °C
Permitted ambient temperature max.+70 °C
InstallationBundig
Output functionNAMUR
Cable length2 m
ConnectionPVC-Kabel, 2 x 0,14 mm?
CEJA
RoHSJA
ATEX product marking dustEx II 1D Ex ia Ex IIIC T 101°C Da
ATEX product marking gasEx II 1G Ex ia Ex IIC T1 – T6 Ga
Certified Zones ATEX1G1D
IECEX product marking dustEx ia IIIC T101° Da
IECEX product marking gasEx ia IIC T1 – T6 Ga
MTTF3664,46 Jahre
WHG certificationAuf Anfrage
''